1xEV-DO BTS Analyzer (Option K84) R&S FSL
1300.2519.12 4.396 E-11
Softkeys of the trigger menu (1xEV-DO BTS Analyzer mode)
The following table shows all softkeys available in the trigger menu in 1xEV-DO BTS Analyzer mode. It
is possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or measurement mode, this information is delivered in the corresponding
softkey description.
Command
Trigger Source
Trigger Polarity Pos/Neg
Trigger Offset
Trigger Source
For details refer to the Trigger Source softkey of the IQ Capture Settings dialog box.
Trigger Polarity Pos/Neg
For details refer to the Trigger Polarity softkey of the IQ Capture Settings dialog box.
Trigger Offset
For details refer to the Trigger Offset softkey in the trigger menu of the base unit.
Softkeys of the trace menu (1xEV-DO BTS Analyzer mode)
The following table shows all softkeys available in the trace menu in 1xEV-DO BTS Analyzer mode. It
is possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or measurement mode, this information is delivered in the corresponding
softkey description.
Command
Trace Mode
Screen Focus A/B
Screen Size Full/Split
Scaling Auto Scale Once
y-Axis Maximum
y-Axis Minimum
Sweep Count
Trace Mode
Opens a dialog box, in which the trace mode can be selected. For details on the various trace
modes refer to the Trace mode overview on page 4.40.
Note that the Blank trace mode is not available for the code domain measurements.
Remote: DISP:TRAC:MODE AVER
To Next Page
Loading...
