Instrument Setup and Interface Configuration - SETUP Key R&S FSL
1300.2519.12 4.504 E-11
Select Screen Color Set
Opens the Select Screen Color Set dialog box to select default or user defined color settings.
I
f one of the default settings is selected (Default Colors 1/2), the default settings for brightness,
color tint and color saturation for all display screen elements are restored. The default color
schemes provide optimum visibility of all picture elements at an angle of vision from above or
below. Default setting is Default Colors 1.
If User Defined Colors is selected, a user-defined color set can be defined. For step-by-step
instruction refer to the Quick Start Guide, chapter 2 "Preparing for Use".
This softkey is available from firmware version 1.10.
Remote: DISP:CMAP:DEF2
Color On/Off
Switches from color display to black-and-white display and back. The default setting is color
display.
This softkey is available from firmware version 1.10.
Select Object
Opens the Color Setup dialog box to select the color settings for a selected object.
The Selected Object list is displayed to select the object. For setting the color the predefined
colors are displayed.
This softkey is available from firmware version 1.10.
Remote: DISP:CMAP2:HSL 0.3,0.8,1.0 (screen colors)
Remote: HCOP:CMAP2:HSL 0.3,0.8,1.0 (print colors)
Predefined Colors
In the Color Setup dialog box, displays the Predefined Colors (alternative to the Predefined
Colors button). This softkey is only available if, in the Select Color Set dialog box, the User
Defined Colors option is selected or the Color Setup dialog box is displayed. For further details
refer to the Quick Start Guide, chapter 2 "Preparing for Use".
This softkey is available from firmware version 1.10.
Remote: DISP:CMAP2:PDEF GRE (screen colors)
Remote: HCOP:CMAP2:PDEF GRE (print colors)
User Defined Colors
In the Color Setup dialog box, displays the User Defined Colors (alternative to the User
Defined Colors button). This softkey is only available if, in the Select Color Set dialog box, the
User Defined Colors option is selected or the Color Setup dialog box is displayed. For further
details refer to the Quick Start Guide, chapter 2 "Preparing for Use".
This softkey is available from firmware version 1.10.
Remote: DISP:CMAP2:HSL 0.3,0.8,1.0 (screen colors)
Remote: HCOP:CMAP2:HSL 0.3,0.8,1.0 (print colors)
To Next Page
Loading...
