Rohde & Schwarz R&S FSL3 - Page 753

WiMAX, WiBro Measurements (K92/K93) – Status Reporting System R&S FSL
1300.2519.12 5.44 E-11
WiMAX, WiBro Measurements (K92/K93) – Status
Reporting System
Additionally to the registers provided by the base system, the following registers are used or modified in
the WiMAX IEEE 802.16 OFDM, OFDMA Measurements option (R&S FSL–K93):
• STATus:OPERation Register
Although this register is provided by the base system, the WiMAX IEEE 802.16 OFDM, OFDMA
Measurements option (R&S FSL–K93) makes use of bits not used within the base system.
• STATus:QUEStionable:LIMit Register, STATus:QUEStionable:SYNC Register
Although these registers are provided by the base system, the WiMAX IEEE 802.16 OFDM,
OFDMA Measurements option (R&S FSL–K93) uses different bits and definitions.
The following registers are provided by the base system and are not available from the WiMAX IEEE
802.16 OFDM, OFDMA Measurements option (R&S FSL–K93) command tree:
• STATus:QUEStionable:ACPLimit Register
• STATus:QUEStionable:LMARgin Register
Detailed information on the status registers of the base system is given in section Status Reporting
System. In this section, only the new and altered status registers / bits for the WiMAX IEEE 802.16
OFDM, OFDMA Measurements option (R&S FSL–K93) are described.
The WiMAX IEEE 802.16 OFDM, OFDMA Measurements option (R&S FSL–K93) includes the
functionality of the WiMAX 802.16 OFDM Measurements option (R&S FSL–K92). Accordingly both
options are described together in this section. The options are available from firmware version 1.40
(R&S FSL–K92) and 1.50 (R&S FSL–K93).
STATus:OPERation Register
Additionally to the bits assigned by the base system (for details refer to STATus:OPERation Register),
bit no. 4 is defined:
Bit No Meaning
4
MEASuring
This bit is set while a measurement is in progress.