R&S FSL Common Commands
1300.2519.12 6.9 E-11
*TRG
TRIGGER initiates all actions in the currently active test screen expecting a trigger event. This
command corresponds to the INITiate:IMMediate command. For details refer to section
"Remote Commands of the Base Unit", "TRIGger Subsystem".
*TST?
SELF TEST QUERY initiates the self test of the instrument and outputs an error code in decimal
form.
Parameter
0 = no error
*WAI
WAIT-to-CONTINUE permits servicing of subsequent commands only after all preceding
commands have been executed and all signals have settled (see chapter 5 "Remote Control -
Basics", and *OPC command).
To Next Page
Loading...
