R&S FSL DIAGnostic Subsystem
1300.2519.12 6.123 E-11
E
xample
D
IAG:SERV:HWIN?
Queries the hardware information.
"FRONTEND|100001/003|1300.3009|03|01|00|00",
"MOTHERBOARD|123456/002|1300.3080|02|00|00|00",
...
Characteristics
*RST value: -
SCPI: device-specific
Mode
all
DIAGnostic<1|2>:SERVice:INPut[:SELect]
This command toggles between the RF input on the front panel and the internal 65.83 MHz
reference signal.
Parameter
CALibration | RF | TG
Example
DIAG:SERV:INP CAL
Characteristics
*RST value: RF
SCPI: device-specific
Mode
all
DIAGnostic<1|2>:SERVice:INPut:PULSed[:STATe]
This command has no effect (only the comb generator is available), but is implemented to
provide compatibility with the FSP family.
Parameter
ON | OFF
Example
DIAG:SERV:INP:PULS ON
Characteristics
*RST value: ON
SCPI: conform
Mode
all
To Next Page
Loading...
