R&S FSL DISPlay Subsystem
1300.2519.12 6.127 E-11
CMAP suffix assignment
Each numeric suffix of CMAP is assigned one or several graphical elements which can be
modified by varying the corresponding color setting. The following assignment applies:
Suffix Description
CMAP1 Background
CMAP2 Grid
CMAP3 Common Text
CMAP4 Check Status OK
CMAP5 Check Status Error
CMAP6 Text Special 1
CMAP7 Text Special 2
CMAP8 Trace 1
CMAP9 Trace 2
CMAP10 Trace 3
CMAP11 Marker Info Text
CMAP12 Limit Lines
CMAP13 Limit and Margin Check - "Pass"
CMAP14 Limit and Margin Check - "Fail"
CMAP15 Softkey Text
CMAP16 Softkey Background
CMAP17 Selected Field Text
CMAP18 Selected Field Background
CMAP19 Softkey 3D Bright Part
CMAP20 Softkey 3D Dark Part
CMAP21 Softkey State "On"
CMAP22 Softkey State "Dialog open"
CMAP23 Softkey Text Disabled
CMAP24 Logo
CMAP25 Trace 4
CMAP26 Grid - Minorlines
DISPlay:ANNotation:FREQuency
This command switches the x-axis annotation on or off.
This command is available from firmware version 1.10.
Parameter
ON | OFF
Example
DISP:ANN:FREQ OFF
Characteristics
*RST value: ON
SCPI: conform
Mode
all
To Next Page
Loading...
