DISPlay Subsystem R&S FSL
1300.2519.12 6.128 E-11
DISPlay:CMAP<1...26>:DEFault<1|2>
This command resets the screen colors of all display items to their default settings. Two default
settings DEFault1 and DEFault2 are available. The numeric suffix of CMAP is irrelevant.
This command is an event and therefore has no query and no *RST value.
This command is available from firmware version 1.10.
Example
DISP:CMAP:DEF2
Selects default setting 2 for setting the colors.
Characteristics
*RST value: -
SCPI: conform
Mode
all
DISPlay:CMAP<1...26>:HSL
This command defines the color table of the instrument.
For the numeric suffix assignment of CMAP refer to "CMAP suffix assignment" on page 6.127.
The set values are not changed by *RST.
This command is available from firmware version 1.10.
Parameter
hue = TINT
sat = SATURATION
lum = BRIGHTNESS
The value range is 0 to 1 for all parameters.
Example
DISP:CMAP2:HSL 0.3,0.8,1.0
Changes the grid color.
Characteristics
*RST value: -
SCPI: conform
Mode
all
DISPlay:CMAP<1...26>:PDEFined
This command defines the color table of the instrument using predefined color values. Each
numeric suffix of CMAP is assigned to one or several graphical elements which can be modified
by varying the corresponding color setting.
For the numeric suffix assignment of CMAP refer to "CMAP suffix assignment" on page 6.127.
The values set are not changed by *RST.
This command is available from firmware version 1.10.
Parameter
BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta | YELLow | WHITe | DGRAy |
LGRAy | LBLUe | LGREen | LCYan | LRED | LMAGenta
To Next Page
Loading...
