R&S FSL DISPlay Subsystem
1300.2519.12 6.129 E-11
Example
DISP:CMAP2:PDEF GRE
Characteristics
*RST value: -
SCPI: conform
Mode
all
DISPlay:FORMat
This command has no effect but is implemented for reasons of compatibility with the FSP family.
It switches the measurement result display between FULL SCREEN and SPLIT SCREEN.
This command is available from firmware version 1.10.
Parameter
SINGle | SPLit
Example
DISP:FORM SPL
Switches the display to 2 measurement windows.
Characteristics
*RST value: SINGle
SCPI: device-specific
Mode
A
DISPlay:LOGO
This command switches the company logo on the screen on or off.
This command is available from firmware version 1.10.
Parameter
ON | OFF
Example
DISP:LOGO OFF
Characteristics
*RST value: ON
SCPI: device-specific
Mode
all
To Next Page
Loading...
