MMEMory Subsystem R&S FSL
1300.2519.12 6.160 E-11
M
MEMory:MDIRectory
This command creates a new directory. The file name includes indication of the path and may
also include the drive name. The path name complies with DOS conventions.
This command is an event and therefore has no *RST value and no query.
Parameter
<directory_name> = DOS path name
Example
MMEM:MDIR 'C:\R_S\Instr\user'
Characteristics
*RST value: -
SCPI: device-specific
Mode
all
MMEMory:MOVE
This command renames existing files, if <file_destination> contains no path indication.
Otherwise the file is moved to the indicated path and stored under the file name specified there,
if any.
This command is an event and therefore has no *RST value and no query.
Parameter
<file_source>,<file_destination> = <file_name> = DOS file name
The file name includes indication of the path and may also include the drive. The path name
complies with DOS conventions.
Example
MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
MMEM:MOVE 'C:\TEST01.CFG','C:\R_S\Instr\user
Moves TEST01.CFG from C:\ to C:\R_S\Instr\user.
MMEM:MOVE 'C:\TEST01.CFG','C:\R_S\Instr\user\SETUP.CFG'
Moves TEST01.CFG from C:\ to C:\R_S\Instr\user and renames the file in SETUP.CFG.
Characteristics
*RST value: -
SCPI: conform
Mode
all
To Next Page
Loading...
