Rohde & Schwarz R&S FSL3 - Page 920

R&S FSL MMEMory Subsystem
1300.2519.12 6.161 E-11
M
MEMory:MSIS
This command changes to the drive indicated. The drive may be the internal hard disk C:.
Parameter
<device> = A: | C: ... Z:
The path name complies with DOS conventions.
Example
MMEM:MSIS 'C:'
Characteristics
*RST value: "C:
SCPI: conform
Mode
all
MMEMory:NAME
This command defines a destination file for the printout started with the
HCOPy[:IMMediate<1|2>] command. In this case the printer output must be routed to a file
as destination.
This command is an event and therefore has no *RST value and no query.
Parameter
<file_name> = DOS file name
The file name includes indication of the path and may also include the drive name. The file
name and path information comply with DOS conventions.
Example
MMEM:NAME 'C:\R_S\instr\user\PRINT1.BMP'
Selects the file name.
Characteristics
*RST value: -
SCPI: conform
Mode
all
MMEMory:NETWork:MAP
This command maps a drive to a server or server folder of the network. As a prerequisite in
Microsoft networks, sharing of this server or server folder must be enabled.
This command is an event and therefore has no *RST value and no query.
This command is available from firmware version 1.70.
Parameter
'<string>','<string>'[,'<string>','<string>'],[<Boolean>]
with '<string>','<string>' = '<drive>','<\\host name or IP address\share name>'
[,'<string>','<string>'],[<Boolean>] = '<user name>','<password>',ON | OFF for
connecting under a different user name, and enabling/disabling reconnect at logon.
The entry is optional. The Boolean parameter can be omitted.