Rohde & Schwarz R&S FSL3 - Page 997

STATus Subsystem R&S FSL
1300.2519.12 6.238 E-11
STATus:OPERation:ENABle
This command sets the bits of the ENABle section of the STATus:OPERation register. The
ENABle register selectively enables the individual events of the associated EVENt section for
the summary bit in the status byte.
Parameter
0 to 65535
Example
STAT:OPER:ENAB 65535
Characteristics
*RST value: -
SCPI: conform
Mode
all
STATus:OPERation:PTRansition
This command sets the edge detectors of all bits of the STATus:OPERation register from 0 to 1
for the transitions of the CONDition bit.
Parameter
0 to 65535
Example
STAT:OPER:PTR 65535
Characteristics
*RST value: -
SCPI: conform
Mode
all
STATus:OPERation:NTRansition
This command sets the edge detectors of all bits of the STATus:OPERation register from 1 to 0
for the transitions of the CONDition bit.
Parameter
0 to 65535
Example
STAT:OPER:NTR 65535
Characteristics
*RST value: -
SCPI: conform
Mode
all