Sinee EM500 - Page 80

EM500 Open-Loop Vector Control Inverter User Manual
80
F00.12
Synthetic Gain of
Main and Auxiliary
Frequency
0.0 - 300.0
%
100.0
●
F00.13
Analog Adjustment
of Synthetic
Frequency
0: Synthetic Frequency of Main and
Auxiliary Channels
1: AI1 * Synthetic Frequency of Main
and Auxiliary Channels
2: AI2 * Synthetic Frequency of Main
and Auxiliary Channels
3: AI3 * Synthetic Frequency of Main
and Auxiliary Channels
4: AI4 * Synthetic Frequency of Main
and Auxiliary Channels
5: High-Frequency Pulse (PULSE) *
Synthetic Frequency of Main and
Auxiliary Channels
0
〇
F00.14
Acceleration Time 1
0.00 - 650.00 (F15.13=0)
0.0 - 6500.0 (F15.13=1)
0 - 65000 (F15.13=2)
s
15.00
●
F00.15
Deceleration Time 1
0.00 - 650.00 (F15.13=0)
0.0 - 6500.0 (F15.13=1)
0 - 65000 (F15.13=2)
s
15.00
●
F00.16
Maximum
Frequency
1.00 - 600.00
Hz
50.00
〇
F00.17
Upper Limit
Frequency Control
Options
0: Set through F00.18
1: AI1
2: AI2
3: AI3
4: AI4 (Expansion Card)
5: High-Frequency Pulse Input (X7)
6: Upper Limit Frequency
Communication Percentage Setting
7: Upper Limit Frequency
Communication Direct Setting
0
〇
F00.18
Upper Limit
Frequency
Lower Limit Frequency F00.19 -
Maximum Frequency F00.16
Hz
50.00
●
F00.19
Lower Limit
Frequency
0.00 - Upper Limit Frequency F00.18
Hz
0.00
●
F00.20
Running Direction
0: Same
1: Opposite
0
●