TECO A510s - Removing the Front Cover and Keypad; Standard Type

3-6
3.5 Removing the Front Cover and Keypad
Caution
 Before making any wiring connections to the inverter the front cover needs to be
removed.
 It is not required to remove the digital operator before making any wiring connections.
 Models 200V, 1 – 25 HP and 400V, 1 – 30 HP and
575V/690V 1 – 40 HP have a
plastic cover. Loosen the screws and remove the cover to gain access to the terminals
and make wiring connections. Place the plastic cover back and fasten screws when
wiring connections have been made.
 Models 200V, 30 - 150HP and 400V, 40 - 425HP and
690V 50 - 270HP have a metal
cover. Loosen the screws and remove the cover to gain access to the terminals and
make wiring connections. Place the metal cover back and fasten screws when wiring
connections have been made.
3.5.1 Standard Type
(a) 200V: 1 ~ 7.5 HP / 400V: 1 ~ 7.5 HP /575V: 1~3HP
Step 1: Unscrew
Step 2: Remove cover