TECO A510s - C;B CPLD Ver.; PG Card ID; PG Card Ver.; Fault Storage Selections

4-261
13-10 Parameter Password Function 2
Range
0 ~ 9999
13-11 C/B CPLD Ver.
Range
0.00~9.99
This parameter displays the CPLD software version on the control board. It is only displayed on the control board
with CPLD.
13-12 PG Card Id
Range
0~255
This parameter displays the ID of option card on the control board. It is only displayed coupled with the option
card.
【0】：none
【1】：PG-L
【2】：PG-O
【3】：PG-PM
【4】：PG-PMS
【5】：PG-PMR
【6】：CM-P
【7】：CM-C
【8】：IO-8DO
13-13 PG Card Ver.
Range
0.00~9.99
This parameter displays the CPLD software version of the option card on the control board. It is only displayed
coupled with the option card.
13-14 Fault Storage Selections
Range
0:
Fault Messages of Auto Restart are not saved.
1: Fault Messages of Auto Restart are saved.
13-14=0,
The fault messages are not saved in the fault history (12-46~12-49) in the process of restart when the auto reset
function is active.
13-14=1,
The fault messages are saved in the fault history (12-46~12-49) in the process of restart when the auto reset
function is active.
13-15 Inverter type
Range
Display Inverter Type