4-280
In wobble operation, the inverter operates uses the in the wobble time (19-04, tup + tdown) and wobble frequency
(19-05, tup / tdown).
Set multi-function digital output terminals (R1A-R1C, R2A-R2C) to output wobble operation (in acceleration) by
setting from 03-11 to 03-12 to 20 or 21.
Refer to the figure 4.4.105 for the wobble ON / OFF control.
Figure 4.4.105 ON/OFF control of wobble
To Next Page
Loading...
