TECO A510s - Monitor Mode

4-14
Monitor Mode
In monitor mode inverter signals can be monitored such as output frequency, output current and output
voltage, etc…) as well as fault information and fault trace. See Fig 4.2.2.2 for keypad navigation.
Power ON
Monitor
Freq Ref
12-17=000.00Hz
12-18=0000.0A
12-16=005.00Hz
Flt Freq Ref
12-15=000.00Hz
Monitor
Monitor
12-17=000.00Hz
12-18=0000.0A
Flt DC Voltage
12-17=000.00Hz
12-18=0000.0A
00 Basic Func.
01 V/F Pattern.
02 Motor Parameter
Group
DSP
FUN
DSP
FUN
DSP
FUN
DSP
FUN
12-14=0000.0V
Fig 4.2.2.2 Monitor Mode
Note:
- To scroll through the available monitor parameter list, press and hold the ▲ (up) or ▼ (down) key.