4-255
11- 59 Gain of Preventing Oscillation
Range
0.01~2.50
It is used to adjust preventing oscillation function.
If the oscillation in driving motor occurs at normal duty, it is required to increase the setting value gradually in the
unit of 0.01.
11- 60 Upper Limit of Preventing Oscillation
Range
0~100 %
It is required to limit the preventing oscillation upper limit within the setting value.
11- 61 Time Parameter of Preventing Oscillation
Range
0~100
Adjust the response of oscillation function. (Time parameter of adjust preventing oscillation function delay.)
11- 62 Selection of Preventing Oscillation
Range
0:
Mode 1
1: Mode 2
When 11-62=0: Mode 1, the response to preventing oscillation is slower.
When 11-62=1: Mode 2, the response to preventing oscillation is faster.
11- 63 Strong Magnetic Selection
Range
0:
Disable
1: Enable
When 11-63=0, it does not have strong magnetic function.
When 11-63=1, it has the strong magnetic function.
To Next Page
Loading...
