TECO A510s - Power-Up Monitor; Changing Monitor at Power-Up

4-7
4.1.4 Power-up Monitor
 Power-up
 Changing Monitor at Power-up
12- 00 Display Selection
Range
Highest bit -> 0 0 0 0 0 <- Lowest bit
The setting range for each bit is 0 ~ 7 from the highest bit to the lowest bit.
0: No display 4: Temperature
1: Output current 5: PID feedback
2: Output voltage 6: AI1 value
3: DC voltage 7: AI2 value
Example: 12- 00=【10000】
DSP/FUN
DSP/FUN
DSP/FUN
After 3 sec.
Switch
Mode
Parameter Selection
Output Current
Frequency Reference
Display Voltage Class
at Power-up