TECO A510s - Acceleration; Deceleration Time Selection; Terminal S5 Switch between Tacc1;Tacc2 and Tdec1;Tdec2

4-96
Size
Acceleration / Deceleration
Default Value
575V series
1~3HP 10s
5~10HP 20s
690V series
15~40HP 25s
50~535HP 30s
A: Select acceleration and deceleration time via the digital input terminals
The following table shows the acceleration / deceleration selected when the digital input function Accel/ Decel
time 1 (#10) and Accel/Decel time 2 1(#30) are used.
Table 4.4.1 acceleration / deceleration time selection
Accel/decel time 2
(Set 03-00 ~ 03-07 = 30)
Accel/decel time 1
(Set 03-00 to 03-07 = 10)
Acceleration
time
Deceleration
time
0 0 Taccc1 (00-14) Tdec1 (00-15)
0 1 Taccc2 (00-16) Tdec2 (00-17)
1 0 Taccc3 (00-21) Tdec3 (00-22)
1 1 Taccc4 (00-23) Tdec4 (00-24)
0: OFF, 1: ON
Figure 4.4.7: Terminal S5 switch between Tacc1/Tacc2 and Tdec1/Tdec2