TECO A510s - Summation and Subtraction Functions; Multiplication and Division Modes

4-328
5: Summation and subtraction functions
RESULT (calculation result) = V1+ V2- V3
Symbol Description

Calculation result : RESULT

Addend V1(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Addend V2(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Subtrahend V3(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Coil output of error signal (M1~MF)

Addition and subtraction modes number (AS1~AS4)
6: Multiplication and division modes
RESULT（calculation result）=V1*V2/V3
Symbol Description

Calculation result : RESULT

Multiplier V1(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Multiplier V2(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Divisor V3(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7, constant )

Coil output of error signal（M1~MF）

Multiplication and division modes number (MD1~ MD4)