TECO A510s - User Parameter Setting (00-41 to 00-56) (Only for LCD Keypad)

4-107
User parameter setting (00-41 to 00-56) (only for LCD keypad)
00- 41
User parameter 0
00- 42
User parameter 1
00- 43
User parameter 2
00- 44
User parameter 3
00- 45
User parameter 4
00- 46
User parameter 5
00- 47
User parameter 6
00- 48
User parameter 7
00- 48
User parameter 8
00- 50
User parameter 9
00- 51
User parameter 10
00- 52
User parameter 11
00- 53
User parameter 12
00- 54
User parameter 13
00- 55
User parameter 14
00- 56
User parameter 15
‧ User parameter (00-41 ~ 00-56) can select 16 sets of parameters (01-00 group ~ 24-06 group) and put them
into the list to do the fast access setting.
‧ When the access setting of parameter 13-06 is set to 1, user parameter 00-41 ~ 00-56 can be displayed and
changed.
‧ User parameter 00-41 ~ 00-56 can be changed in the advanced modes, exclusive of being in operation.
‧ Set value in the parameter of 00-41 ~ 00-56 and set 13-06 to 1.
‧ When 13-06=1, only parameter of 00-00 ~ 00-56 can be set or read in the advanced modes. 13-06=1 is
enabled in the parameter setting of 00-41~00-56.
‧ When user would like to leave the screen of user parameters, press RESET key and then DSP/FUN key to
select parameter Group 13.