11-18
11.6 Other Options
A. Analog Operator
‧
Besides the standard LED & LCD keypad in inverter A510S, analog dial operator (JNEP-16-A) is also
available. Refer to the following figure. This operator can be pulled out and movable. Refer to the
following figure for wiring with inverter.
R
S
T
R
S
T
Circuit-breaker
Foward
Stop
24VG
10V for speed setting
(+10V, 20 mA)
GND 0V
AI1 Main speed command
0 ~ 10V
2k
Main frequency setting
A01
GND
FM
Analo g output
B1/P B2
V
W
IM
U
R1A
R1B
R1
C
Multi-fu nction t erminal
output
250V AC, below 1A
30V DC, below 1A
DO1
DO
G
DO2
Mult-function output
1, 2
(OPEN
COLLECTOR
48V, 50mA)
Run
Consistent
frequency
A510S
Analog operat or
(JNEP-16-A)
S1
S6
(a) Appearance (b) Wiring
B. Blank cover and keypad extension cable
When used for remote control purposes, the keypad can be removed and remotely connected with an
extension cable. Extension cables are available in the following lengths: 1m (3.3ft), 2m (6.6ft), 3m (10ft),
and 5m (16.4ft).
Remote control
Name Model Specification
LED digital
operator wire
with blank
cover
JN5-CB-01M
1m (3.3ft)
JN5-CB-02M
2m (6.6ft)
JN5-CB-03M
3m (10ft)
JN5-CB-05M
5m (16.4ft)
To Next Page
Loading...
