4-158
03-15
Current Agree Level
Range 0.1~999.9 A
03-16
Delay Time of Current Agree Detection
Range
0.1~10.0 Sec
03-11=13, then,
When the output current >03-15, relay is active.
03-15: The suggested setting value is 0.1~ the motor rated current.
03-16: The delay time performs depending on the setting value.
Note: Delay time from ON to OFF in the signal of relay is 100ms (constant).
Time Diagram:
03-16
Constant
100 msec
03-15
03-11
Relay Output
ON
I : Load current
100%
T
03-17
Delay Time of Current Agree Detection
Range
0.1~10.0 Sec
03-18
Delay Time of Current Agree Detection
Range 0.1~10.0 Sec
When 03-11=14, the real frequency equal to the value of 03-17(Delay Time of Current Agree Detection) in
acceleration time, the relay output will execute.
When 03-11=14, the real frequency equal to the value of 03-18(
Delay Time of Current Agree Detection) in
deceleration time, the relay output will stop execute.
To Next Page
Loading...
