4-200
Figure 4.4.60 DC braking to stop
07-09=3: Coast to stop with timer
When a stop command is issued the motor will coast to a stop after the minimum Baseblock time (07-18) has
expired. The inverter ignores the run command until the total time of the timer has expired.
The total time of the timer is determined by the deceleration time (00-15, 17, 22 or 24) and the output frequency
upon stop. Refer to Figure 4.4.61
Figure 4.4.61 Coast to stop with timer
Time
To Next Page
Loading...
