TECO A510s - PID Input Selection

4-228
(1) Select PID target value (10-00):
10-00: PID target value
=1: analog AI1 given (default)
=2: analog AI2 given
=3: Pulse given
=4:10-02
=6 frequency command (00-05)
(2) Select PID feedback value (10-01):
10-01: PID feedback value
= 1: Analog AI1 given
= 2: Analog AI2 given
=3: Pulse given
Figure 4.4.80 PID input selection
Pulse input
10-00=3
10-00=6
Freq Command (00-05)
A12
Pulse Input