Part 1:xv
IM 701210-05E
Flow of Operation
The figure below provides an overview of the flow of operations described in this manual.
For a description of each item, see the relevant chapter or section.
Preparations for Measurements
Preparations for Measurements
Displaying Waveforms on the Screen
Displaying Waveforms on the Screen
Horizontal and Vertical Axes Setting
Horizontal and Vertical Axes Setting
DL750/DL750P Installation Section 3.2
Module Installation Section 3.3
Power Supply Connection and ON/OFF Section 3.4
Probe Connection and Phase Correction Sections 3.6, 3.7,
and 3.11
*1
Initialization Section 4.4
Auto Setup Section 4.5
Thermocouple Connection
Section 3.9
Bridge Head Connection
Section 3.10
Acceleration Sensor
Connection
Section 3.12
Sensor Connection
Section 3.13
Measuring Lead
Connection
*2
Section 3.8
• Input Coupling
Section 5.5
• Bandwidth Limit
Section 5.7
• Temp. Measurement
Setting
Section 5.16
• Bandwidth Limit
Section 5.7
• Linear Scaling
Section 5.11
• Inversion
Section 5.12
• Strain Measurement
Setting
ection 5.17
• Vertical Position
Section 5.4
• Input Coupling
Section 5.5
• Bandwidth Limit
Section 5.7
• Zooming in or out
of the Vertical Axis
Sections 5.8 and 5.9
• Acceleration
Measurement Setting
Section 5.18
• Vertical Position
Section 5.4
• Zooming in or out
of the Vertical Axis
Sections 5.8 and 5.9
• Offset Value
Section 5.10
• Linear Scaling
Section 5.11
• Frequency*
Measurement Setting
Section 5.19
• V/div Section 5.3
• Vertical Position
Section 5.4
• Input Coupling
Section 5.5
• Probe Attenuation and
Current-to-Voltage
Conversion Ratio
Section 5.6
• Bandwidth Limit
Section 5.7
• Zooming in or out
of the Vertical Axis
Sections 5.8 and 5.9
• Offset Value
Section 5.10
• Linear Scaling
Section 5.11
• Inversion
Section 5.12
• Rms Measurement
Section 5.15
Horizontal Axis (Time Axis) Sections 5.2 and 5.14
Vertical Axis
• Channel ON/OFF Section 5.1
*1 When measuring logic waveforms
Continues to the next page
Voltage Measurement
Voltage Measurement
Temp. Measurement
Temp. Measurement
Strain Measurement
Strain Measurement
Acceleration Measurement
Frequency
Measurement, Etc.
*3
Frequency
Measurement, Etc.
*3
*3 Number of rotations, period, duty cycle, power supply frequency,
pulse width, pulse integration, and velocity.
*2 Only when measuring voltage with the 701261,
701262, or 701265.
* Number of rotations, period, duty cycle, power supply
frequency, pulse width, pulse integration, and velocity.
Acceleration
Measurement
To Next Page
Loading...
Need help?
General
