Part 1:xvi
IM 701210-05E
Displaying Waveforms and Information
Displaying Waveforms and Information
• Setting Waveform Display Conditions Sections 8.1 to 8.4 and 8.8
• Zooming on the Waveform Section 8.5
• X-Y Waveform Display Section 8.6
• Snapshot and Clear Trace Section 8.7
• Setting Information Display Conditions Sections 8.9 to 8.13
Waveform Acquisition
• Record length Section 7.2
• Acquisition mode Sections 7.3 and 7.4
• Starting/Stopping waveform Section 7.1
acquisition
Recording in Recorder Mode (DL750P Only)
Recording in Recorder Mode (DL750P Only)
• Loading the Roll Paper Section 9.1
• Selecting the Recorder Mode Section 9.2
• Recording T-Y Waveforms Sections 9.3 to 9.5
• Recording Numeric Values Section 9.6
• Recording X-Y Waveforms Section 9.7
• Reprinting on the Built-in Printer Section 9.8
• Creating a PDF File of the Reprint Section 9.9
Image
Trigger
• Trigger Type* (Simple/Enhanced) Sections 6.5 to 6.17
• Trigger Source, Trigger Slope,
Trigger Level, Etc Sections 6.5 to 6.17
• Trigger Mode Sections 6.1 and 7.5
• Trigger Position Section 6.2
• Trigger Delay Section 6.3
From the previous page
* Simple trigger
• Input signal trigger Sections 6.5
and 6.9
• External trigger Section 6.6
• Line trigger Section 6.7
• Time trigger Section 6.8
Enhanced trigger
• A → B(N) trigger Section 6.10
• A Delay B trigger Section 6.11
• Edge on A trigger Section 6.12
• OR trigger Section 6.13
• B > Time, B < Time, and
B Time Out trigger Section 6.14
• Periodic trigger Section 6.15
• Window trigger Section 6.16
• Wave window trigger Section 6.17
• Dual capture Section 7.6
• Realtime recording to the
internal hard disk (optional) Section 7.7
• Voice memo Sections 3.14
and 7.9
• Acquisition memory backup Section 7.10
The functions below that are not covered in the flow of operations in this section are not explained in this manual. For their
descriptions, see the User’s Manual Part 2 (IM701210-06E).
• Computation, analysis, and searching of waveforms
• Printing of screen image data
• Saving and loading of data
• External trigger I/O, external clock input, video signal output, etc.
• DSP channels (option)
• Ethernet communications (option)
Flow of Operation
To Next Page
Loading...
Need help?
General
