11-12
IM 701210-06E
Changing the Magnification and Display Position
11. As with the zoomed waveform, you can change the zoom rate of Z1 and Z2 by
pressing the Z1 Mag/Z2 Mag soft key and turning the jog shuttle.
12. As with the zoomed waveform, you can move the section that is being zoomed
on Z1 or Z2 window by pressing the Z1 Position/Z2 Position soft key and
turning the jog shuttle.
Setting the Display Position of the Search Results
(When Mode in the ZOOM Menu Is Set to Z1&Z2 or Main&Z1&Z2)
13. Press the Result Window soft key to select Z1 or Z2.
Executing the Search
14. Pressing the Exec soft key to execute the search. The Exec soft key changes
to Abort. To abort the search, press the Abort soft key.
The search results are displayed in the zoomed waveform display position
selected in step 11. You can search 1000 times using the same conditions.
While search is in execution,
is displayed at the upper left corner of the
screen.
Displaying the Previous Search Results
15. Press the Searched Pattern soft key.
16. Turn the jog shuttle to specify the number of the search result you wish to
display. Newer search results are displayed with higher numbers (result 2 is
newer than result 1).
11.4 Search Data Using Search and Zoom Function
To Next Page
Loading...
