YOKOGAWA DL750 User Manual

12-15
IM 701210-06E
Printing the Screen Image Data
12
Setting the Output Format
6. Press the Format soft key. The output format selection menu appears.
7. Select the soft key corresponding to the output format from ESC-P to BJ.
Setting the Color
8. Press the Color soft key to select ON or OFF.
Setting a Comment
9. Press the Comment soft key.
10. Enter the comment string according to the procedure given in section 4.2.
Setting the Print Resolution (When Format Is BJ)
11. Press the Resolution soft key. The print resolution setup menu appears.
12. Press any of the soft keys corresponding to 180 dpi, 300 dpi, 360 dpi, and 600
dpi.
Executing the Print Operation
13. Press PRINT. The screen image data is printed on the USB printer.
To abort printing, press PRINT while printing is in progress.
While printing is in progress,
is indicated at the upper left corner of the
screen.
12.3 Printing Screen Image Data to a USB Printer

YOKOGAWA DL750 Specifications

General

Brand	YOKOGAWA
Model	DL750
Category	Measuring Instruments
Language	English