YOKOGAWA DL750 User Manual

13-47
IM 701210-06E
Saving and Loading Data
13
Specifying the Print Settings
8. Press the Print Setup soft key. The print setup dialog box opens.
When displaying T-Y waveforms, proceed to step 9.
When displaying X-Y waveforms, proceed to steps 14 to 17 and then 23.
Setting the Print Format
9. Use the jog shuttle and SELECT to select Format from Single (1 division) to
Hexadecimal (16 divisions).
Note
The print format setting is linked with the DISPLAY menu > Format setting.
Setting the Extra Area (Only When Displaying the T-Y Waveform)
10. Use the jog shuttle and SELECT to set Extra Area to ON or OFF.
Setting the Flexible Zone (Only When Displaying the T-Y Waveform)
11. Use the jog shuttle and SELECT to select Setup in Flexible Zone.
12. Use the jog shuttle and SELECT to set Mode to OFF or ON.
13. Use the jog shuttle and SELECT to set Upper/Lower of the waveform to be
recorded.
Setting the Graticule
• Setting the Grid
14. Use the jog shuttle and SELECT to set Type to
, OFF, or .
• Setting Dark/Light
15. Use the jog shuttle and SELECT to set Dark/Light to Light or Dark.
• Setting the Width of the Vertical Scale
16. Use the jog shuttle and SELECT to set Width to 1div or 10mm.
Note
The grid setting is linked with the DISPLAY menu > Graticule setting. However, if OFF is
selected, the DISPLAY menu is set to .
When Displaying the T-Y Waveform When Displaying the X-Y Waveform
13.13 Creating PDF files of the printed image (DL750P only)

YOKOGAWA DL750 Specifications

General

Brand	YOKOGAWA
Model	DL750
Category	Measuring Instruments
Language	English