13-58
IM 701210-06E
Explanation
Selecting the Storage Medium and Directory: File List
Media on which saving and loading are possible are displayed on the File List window.
• Display Example of Storage Media
[FD]: Floppy disk
[ZIP]: Zip disk
[PC Card]: PC card
[HD]: Hard disk
[SCSI5]: SCSI device with the ID number set to 5
1
[SCSI5-1]: Partition 1 of a SCSI device whose ID number is 5
1
[NetWork]: Network drive (when the Ethernet interface option is installed)
[USB]: USB storage device
1. When a SCSI device whose ID number is 5 is connected
Selecting the File Attribute: Attr (excluding Net Drive)
Select the file attribute of each file from the following list of choices.
• R/W
Read and write possible.
•R
Read only. Cannot write to the file or delete the file.
Selecting the Files to Be Deleted
You can delete all files that have an asterisk to the left of the file name. There are two
methods in selecting the files to be deleted.
• Selecting the Files One at a Time: Set/Reset
Place an asterisk to the left of the file names one at a time, using the Set/Reset soft
key.
• Selecting All the Files at Once: All Set
Places an asterisk to the left of all the file names selected collectively using the All Set
soft key.
Selecting a file or directory and pressing the All Set soft key places an asterisk on
every file in the directory containing the selected file or directory.
Specifying the File to Be Displayed on the File List Window: Filter
Specify the type of files to be displayed.
• *.Extension
Displays only the data file that was selected in the File Item setup menu and the data
type menu.
• *.*
Displays all the files in the medium.
13.15 Changing the File Attributes and Deleting Files
To Next Page
Loading...
Need help?
General
