Brooks Marathon Express - O-Ring Removal;Replacement;Cleaning

Brooks Automation 9. Maintenance and Repair
Part Number: 605914 Rev. B O-Ring Removal/Replacement/Cleaning
O-Ring Removal/Replacement/Cleaning
Allo-ringsshouldbeinspectedperiodicallytoensureproperoperation.Occasionallyo-ringswill
needtobecleaned(ifcontaminatedwithparticulates)orreplaced(ifdamaged).
ProcedureCategory
Type1Procedure:Equipmentisfullyde-energized.
RequiredTools
l
Brassorplasticpick
l
IsopropylAlcohol(100%)
l
DIWater
MaintenanceStrategy
Theo-ringreplacementprocedurerequiresremovaloftheexistingo-ring,inspectionoftheseal
area,repairofthesealareaifnecessary,inspectionoftheo-ring,andreplacementoftheo-ringif
necessary.Turnoffanddisconnectallpower,communications,andairconnectionsasdetailedin
"Shut-down"onpage1.
TheMarathonExpressmaybeusedinanenvironmentwherehazardousmaterials
arepresent,andsurfacesmaybecontaminatedbythosematerials.Refertothe
facility’sMaterialSafetyDataSheetsforthosematerialstodetermineproper
handlingandfollowthefacility’sprocedurestocertifytheenvironmentissafe.

Disposeofcleaningclothsperthefacility’sproceduresandlocalregulations.

Copyright © 2023, Brooks Automation, Inc.
181