Brooks Marathon Express - Procedure Category; Required Tools and Equipment

Brooks Automation 3. Installation
Part Number: 605914 Rev. B Installation Procedure

Tip Hazard
TiphazardexistswhenmovingtheVCEmodulesorwhentheyarenotconnected
togetheraspartoftheMarathonExpress.

DonotattempttomovetheVCEwithouttheuseofaforkliftorahoist.Moveonsmooth
floorsonly.

Personal Protective Equipment
FailuretotakeproperprecautionswheninstallingtheMarathonExpressmaycause
injurytotheeye.

Safetyglassesandsteeltoeshoesshouldbewornatalltimeswheninstallingthe
MarathonExpress.

Procedure Category
Type1Procedure:Equipmentisfullyde-energized.
Required Tools and Equipment
ThefollowingtoolsandmaterialsarerequiredduringtheinstallationoftheMarathonExpress:
l
MetricHexWrenches
l
StandardHexWrenches
l
Scale(ruler)
l
I-beamLevel
l
BubbleLevel
l
1/2inchBolt(orThreadedRod),Qty3,forMXsystemtie-down
Copyright © 2023, Brooks Automation, Inc.
61