MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: yes
Security: disabled
DHCPv4 snooping: profile not known on this node
Bridge MTU: 1500 bytes
Number of bridge ports: 2
Number of MAC addresses: 65536
Multi-spanning tree instance: 0
GigabitEthernet0/1/0/0, state: oper up
Number of MAC: 32770
Sent(Packets/Bytes): 0/21838568
Received(Packets/Bytes): 5704781/444972918
Statistics:
packets: received 5704781 (multicast 0, broadcast 0, unknown unicast 5704781, unicast 0),
sent 0
bytes: received 444972918 (multicast 0, broadcast 0, unknown unicast 444972918, unicast 0),
sent 4950
MAC move: 0
Nbor 1.1.1.1 pw-id 1
Number of MAC: 32766
Sent(Packets/Bytes): 0/0
Received(Packets/Bytes): 5703987/444910986
0 2 65536 Enabled Enabled UP
Statistics:
packets: received 1000 (unicast 1000), sent 0
bytes: received 128000 (unicast 128000), sent 0
MAC move: 10
This table describes the significant fields shown in the display:
Table 11: show l2vpn forwarding bridge-domain Command Field Descriptions
DescriptionField
Name of bridge domain is displayed.Bridge-Domain Name
ID assigned to this bridge domain is displayed.Bridge ID
Number of ports that are part of this bridge domain
is displayed.
Ports
Number of MAC addresses that are learned on this
bridge domain is displayed.
MAC Addr
Flooding of packets are displayed if they are enabled
on this bridge domain.
Flooding
Learning of MAC addresses are displayed if they are
enabled on this bridge domain.
Learning
Current state of the bridge domain is displayed.State
This example shows sample output of detailed information on the bridge that is used by the forwarding layer:
RP/0/RSP0/CPU0:router# show l2vpn forwarding bridge-domain detail location 0/0/CPU0
Tue Mar 13 12:35:45.276 PDT
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
343
Multipoint Layer 2 Services Commands
show l2vpn forwarding bridge-domain (VPLS)
To Next Page
Loading...
Need help?
General
