Comen N10 - Page 281

System Alarm Messages
III-15
2.12) Technical Alarms of Printer
Alarm Message
Alarm Priority
Alarm Clearance
Mode
Possible cause
Solution
Printer No
Connected
Prompt
/
The printer is not
properly connected.
Check the printer is
correctly connected.
No Paper
Prompt
/
The printer has no
paper.
Load the printer paper.
2.13) Other Technical Alarm/information message
Alarm Message
Alarm Priority
Alarm Clearance
Mode
Possible cause
Solution
XX module conflict
Prompt
/
The number of same
modules inserted
exceeds the maximum
configuration.
Remove the other
modules.
Insufficient disk
space
High, Medium or
Low
The alarm sound
and light are
clearable
History profile has
filled the available
disk memory. Or
admitted too many
patients.
Usually the monitor will
delete the history
profile. If the alarm
condition last long,
please contact the
service personnel for
maintenance.
Storage Disk Error
/
Fully clearable
Storage disk failure or
file corruption.
Restart the monitor and
Format the storage disk.
If the alarm condition
remains, contact the
service personnel for
maintenance.