241
Navigation
Functions during route guidance
Option 2: In the POI main menu, select
the menu item
Category and enter a
POI destination. Please see from the
section “Entering a POI destination via
POI category” on page 220 onwards for
the rest of this function.
Option 3: In the POI main menu, select
the menu item
Phone Number and
enter a POI destination. Please see
from the section “Entering a POI
destination via POI phone number” on
page 223 onwards for the rest of this
function.
Entering a waypoint via the Address
Book
Select the list item
Address Book.
Select a destination. Please see from
the section “Entering a destination via
the Address Book” on page 227
onwards for the rest of this function.
Entering an emergency destination as a
waypoint
Select the list item
Emergency.
Select a emergency category. Please
see from the section “Entering an
emergency destination” on page 228
onwards for the rest of this function.
Entering a waypoint via the map
Select the list item
Map.
Select a destination in the map. Please
see from the section “Entering a
destination via the map” on page 229
onwards for the rest of this function.
After waypoints have been added
If the vehicle is moving, the new route is
immediately calculated after a waypoint is
added. The new waypoint was added as
the second last destination. The main
destination remains the last destination, an
existing waypoint is moved accordingly.
If the vehicle is stationary, the Waypoint
menu appears after a waypoint is added.
The new waypoint was added as the
second last destination. The main
destination remains the last destination, an
existing waypoint is moved accordingly.
To change the position of the added
waypoint: Turn
the controller
until the destination is at the desired
position.
Press the controller
.
This confirms the position.
The following functions are now available:
Changing the order of the destinations,
see page 241
Showing destinations in the map,
see page 242
Deleting a waypoint or the main
destination, see page 242
Deleting all waypoints and the main
destination, see page 242
Changing the order of the destinations
Highlight a destination in the Waypoint
menu.
Push
the controller .
The Options menu appears.
In the Options menu, select the menu
item
Change Order.
Turn
the controller until the
destination is at the desired position.
Press the controller
.
This confirms the new position.
To Next Page
Loading...