242
Navigation
Functions during route guidance
Showing destinations in the map
Highlight a destination in the Waypoint
menu.
Push
the controller .
The Options menu appears.
In the Options menu, select the menu
item
Show on Map.
The map display appears. It shows the
selected destination.
To change the map scale: Turn
the controller
until the desired scale
is reached.
To return to the Waypoint menu:
Briefly press the button.
The display automatically switches back to
the Waypoint menu after a certain time
without operation.
Deleting a waypoint or the main
destination
Highlight a waypoint or the main
destination in the Waypoint menu.
Push
the controller .
The Options menu appears.
In the Options menu, select the menu
item
Delete.
You will be prompted to confirm that
you wish to delete the relevant
destination.
Select
Yes or No.
The destination will be deleted or
retained, depending on the answer
selected.
The Navigation main menu automatically
appears if there are no more destinations.
Deleting all waypoints and the main
destination
Highlight a waypoint in the Waypoint
menu.
Push
the controller .
The Options menu appears.
In the Options menu, select the menu
item
Delete All.
You will be prompted to confirm that
you wish to delete all waypoints.
Select
Yes or No.
All waypoints and the main destination
will be deleted or retained, depending
on the answer selected. The Navigation
main menu automatically appears after
the deletion.
To Next Page
Loading...