High End Systems DL.3 - Chroma Shift; Cto;Ctb

CHAPTER 9
Graphic Functions: Opacity and Effects
DL.3 Digital Light User Manual 87
Chroma Shift
Visual Mode Parameter DMX value = 21
Shifts the red, blue, and green component colors in an image. You can offset color components
v
ertically and or horizontally.
Modifier 1: The default DMX value of 128 (50%) = no adjust
ment. Values below the midpoint
shift the color components right to a maximum at a value of 0. Values above the midpoint shift
the color components left to a maximum at a value of 255 (100%).
Modifier 2: The default DMX value of 128 (50%) = no adjust
ment. Values below the midpoint
shift the color components down to a maximum at a value of 0. Values above the midpoint shift
the color components up to a maximum at a value of 255 (100%).
CTO/CTB
Visual Mode Parameter DMX value = 23
Allows color temperature correction by adding ei
ther Color Temperature Orange or Color
Temperature Blue.
Modifier 1: Decreases the perceived color temperature by adding or
ange from 0 = no
adjustment to a minimum color temperature at a value of 255 (100%).
Modifier 2: Increases the perceived color temperature by
adding blue from 0 = no adjustment
to a maximum color temperature at a value of 255 (100%).
Original Content
Visual Mode Parameter DMX value = 21
Visual Mode Modifier 1 DMX value = 105
Visual Mode Modifier 2 DMX value = 148