CHAPTER 15
Live Video Input and Control
DL.3 Digital Light User Manual 247
Serial Digital Interface (SDI)
SDI capture is another option for input and output to the graphics engine.
NTSC and PAL formats are available for Standard Definition SDI capture. There is no support for
SECAM.
High Definition SDI capture a
ccepts the following formats:
Select a format from the Signal F
ormat fields under the IO tab in the CMAs configuration view
and then click the Apply button to change to the new setting.
NOTE: Unlike S-video format selection, a reboot is not required to change the
SDI format selection. Changes to the SDI format take place instantly on
the DL.3 fixture.
NTSC_M 1080 30PsF 720 60p
NTSC_MJ 1080 29.97PsF 720 59.94p
1080 25PsF 720p
1080 24PsF
1080 23.97PsF
To Next Page
Loading...
