CHAPTER 13
Effect Mode Options Descriptions
DL.3 Digital Light User Manual 153
Color Cycle
Effect Mode parameter DMX value = 14
The image’s color components cycle through RGB, black, and white. When no Red Green or Blue
is added, image fades from full white, to normal image, to black. When RGB/CMY is added the
image fades from the RGB value, to the image with color added.
Modifier 1: Increases red color component from 0 = no adjustment to 255
(100%) =
maximum red saturation.
Modifier 2: Increases green color component from 0
= no adjustment to 255 (100%) =
maximum green saturation.
Modifier 3: Increases blue color component from 0 =
no adjustment to 255 (100%) =
maximum blue saturation.
Color DeConverge
Effect Mode parameter DMX value = 39
This effect separates the different col
or components of an image and offsets them from the
original image position.
Modifier 1: Moves the image’s red component up from 0= no adjustment to 255 (100%) =
maxi
mum distance from original position.
Modifier 2: Moves the image’s green component down and right from 0= no adjustment to 255
(1
00%) = maximum adjustment.
Modifier 3: Moves the image’s blue component down and
left from 0 = no adjustment to 255
(100%) = maximum blue saturation.
Object Effect Global Effect
Object Effect Global Effect
Original Content
Modifier 1 parameter DMX = 211
Modifier 2 parameter DMX = 255
Modifier 3 parameter DMX = 67
To Next Page
Loading...
