APPENDIX A
DMX Protocol
326 DL.3 Digital Light User Manual
Parameter Description and Options
Parameter Description
DMX Value Default
Dec. % Dec. %
MECHANICAL CONTROL
Movement Functions (DL.3, DL.2 fixtures only)
Pan Course
Moves projector head from 0° to 400°
0-
655
35
0-100 32768 50
Pan Fine
Ti
lt Course
Moves projector head from 0° to 240°
0-
65535
0-100 32768 50
Tilt Fine
Di
mmer
Adjusts the mechanical iris located in front of the
proje
ctor output lens from closed to open
0-255 0-100 0 0
Focus Adjusts focus from near to far 0-255 0-100 128 50
Zoom Adjusts zoom from narrow to wide 0-255 0-100 128 50
MSpeed See Appendix B for conversion tables 0-255 0-100 0 0
Macro Reserved for future use 0-255 0-100 0 0
Control
Fu
nction
(To prevent
in
advertent
triggering,
some Control
Function op-
tions will not
activate until
the value has
been held for a
period of time.
A number in
parenthesis is
the minimum
number of
consecutive
times a DMX
value must be
received from
a controller
before the
operation
begins.)
Fixture Movement and Camera Control Options (Set Dimmer
Channel = 0 except for MSpeed Off)
0 0
Pan and Tilt MSpeed off 10-13
NA
Reserved 14-19
Menu Display Off (5) 20-28
Reserved 29
Menu Display Dim (5) 30-38
Reserved 39
Menu Display Bright (5) 40-48
Reserved 49
Preview 50-58
Reserved 59
Home All (20) 60-68
Reserved 69-79
Lamp ON (80) 80-88
Reserved 89
Lamp OFF (80) 90-98
Reserved 99-119
Shutdown (80) 120-130
To Next Page
Loading...
