High End Systems DL.3 - Gray Maker 1

CHAPTER 9
Graphic Functions: Opacity and Effects
DL.3 Digital Light User Manual 95
Gray maker 1
Visual Mode Parameter DMX value = 4
This effect gradually transitions the color image to a
grayscale image. Use the Gray Maker effect
when you want to add an undertone of grey to the colors in an image.
NOTE: If content is already grayscale, there is no effect applied but Modifier 2
can still affect image contrast.
Modifier 1: At a DMX value of 0, the image will be full color. As you increase the DMX value,
more gray is introduced until, at a DMX value of 255, all color has been replaced with shades
of gray.
Modifier 2: Adjusts the brightness of the image at the gr
ayscale transition level selected with
the Modifier 1 parameter.
Original Content
Visual Mode Parameter DMX value = 4
Visual Mode Parameter DMX value = 4
Visual Mode Modifier1 DMX value = 190 (75%)
Visual Mode Modifier2 DMX value = 255 (100%)
Visual Mode Parameter DMX value = 4
Visual Mode Modifier1 DMX value =128 (50%)