CHAPTER 13
Effect Mode Options Descriptions
218 DL.3 Digital Light User Manual
Particle System 2
Effect Mode parameter DMX value = 96
This option can be used to add addition
al
modifier adjustments to the baseline effect
you set up in the Particle System 1 effect.
Modifier 1: Determines the number of
parti
cles from 0 = smallest number to 255
(100%) = largest number of particles.
Modifier 2: Adjusts particle size from 0 =
s
mallest to 255 (100%) = largest particle
size.
TIP: Reducing the particle size
enhances any trailing you set in
the Particle System 1 effect.
Modifier 3: Adjusts the size of the emitter shape you selected in the Particle System 1 effect by
spreading the source area from 0 = the smallest source area to 255 (100%) = the largest.
Particle System 3
Effect Mode parameter DMX value = 97
If you have already selected the Particle System 1 and 2 effects, you can further adjust the
ef
fect with this option.
Modifier 1: Sets the Initial Particle Velocity from 0 = slowest to 255 (100%) = fastest.
Modifier 2: Sets the particle rotation. A DMX value of
128 (50%) = no rotation. Values above
the midpoint rotate counterclockwise from 129 = slowest to 255 (100%) = fastest. Values below
the midpoint rotate clockwise from 0 = fastest to 127 = slowest.
Modifier 3: Sets the particle lifetime from 0 = s
hortest to 255 (100%) = longest
Modifier parameter 1 DMX value = 45
Modifier parameter 2 DMX value = 62
Modifier parameter 3 DMX value = 0
To Next Page
Loading...
