High End Systems DL.3 - Zoom Blur

CHAPTER 13
Effect Mode Options Descriptions
DL.3 Digital Light User Manual 239
Zoom Blur
Effect Mode parameter DMX value = 59
Zooms into a position on the image with a mult-image blurring effect. You can control the
position of the zoom center on the image.
Modifier 1: The default DMX value of 128 (50%) = no adjust
ment. Values below the midpoint
move the horizontal center of the zoom right to 0 = maximum. Values above the midpoint move
the horizontal center of the zoom left to 255 = maximum.
Modifier 2: The default DMX value of 128 (50%) = no adjust
ment. Values below the midpoint
move the vertical center of the zoom down as you approach 0 = maximum. Values above the
midpoint move the vertical center of the zoom up to 255 (100%) = maximum.
Modifier 3: The default DMX value of 128 (50%) = no adjust
ment. Values below the midpoint
zoom in to the image centerpoint to 0 = maximum image size. Values above the midpoint zoom
away from the image centerpoint to 255 = a minimum image size.
NOTE: This effect is also available as a Visual Mode adjusted with 2 Modifier
parameters, (see Zoom Blur o
n page 131.)
Object Effect Global Effect
Original Content
Modifier 1 parameter DMX = 128
Modifier 2 parameter DMX = 128
Modifier 3 parameter DMX = 255