High End Systems DL.3 - Posterizer

CHAPTER 9
Graphic Functions: Opacity and Effects
DL.3 Digital Light User Manual 101
Posterizer
Visual Mode Parameter DMX value = 6
This effect uses the associated Mo
difier 1 parameter to posterize by replacing each color in an
image with the highest values of that color but expanding it only to the border of that color.
There is no bleeding or blending of colors.
NOTE: In this visual mode, you won’t see a change in the image until you
adjust the Modifier 1 parameter
Modifier 1: Adjusts color polarization level. The higher the value, the more color detail will be
removed.
Modifier 2: Adjust the image contrast
from 0 = no adjustment to 255 (100%) = maximum
contrast.
Original Content
Visual Mode Parameter DMX value = 6
Visual Mode Parameter DMX value = 6
Visual Mode Modifier1 DMX value = 190 (75%)
Visual Mode Modifier2 DMX value = 255 (100%)
Visual Mode Parameter DMX value = 6
Visual Mode Modifier 2 DMX value = 255 (100%)