OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-68
(2) REPLACE PRINT HEAD
Select REPLACE PRINT HEAD with the Up and Down buttons, and then press the OK button.
Check that a waste ink bottle is installed and press the OK button.
The carriage stops moving.
Press the power switch to turn the printer off.
Confirm that the print has shut down completely and then replace the print head.
After you have replaced the print head, press power switch to turn the printer on.
For the rest of the procedure, see 3.6.3 Starting the printer after replacing the print head.
INITIALIZING...
PLEASE WAIT
SHUTTING DOWN...
PLEASE WAIT
TURN OFF POWER THEN
REPLACE PRINT HEADS
CARRIAGE IS MOVING
PLEASE WAIT
>>REPLACE PRINT HEAD
BOTTLE IS EMPTY? ◎
>PH MAINTENANCE
REPLACE PRINT HEAD ◎
To Next Page
Loading...
