OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-64
5.4.19 Remaining ink has almost run out
<Description>
The ink LED is blinking.
<Action>
Replace the cartridge with a new one.
If the warning does not disappear, perform the same actions as in 5.4.1 Cap open warning.
5.4.20 Wiper blade replacement
<Description>
The wiper blades will need to be replaced soon.
<Action>
Replace the wiper blades.
If the warning does not disappear, perform the same actions as in 5.4.1 Cap open warning.
5.4.21 Wiper sponge replacement
<Description>
The wiper sponge will need to be replaced soon.
<Action>
Replace the wiper sponge.
If the warning does not disappear, perform the same actions as in 5.4.1 Cap open warning.