Oki IP-6620 - 6.14.2 PAPER-GUIDE-FEEDING64-MW-ASSY (with heater)

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
6-122
6.14.2 PAPER-GUIDE-FEEDING64-MW-ASSY (with heater)
<Removal>
1. Remove the COVER(PINCH-D)64-MW
(see 6.3.10).
2. Remove the eight screws securing the
PAPER-GUIDE-FEEDING64-MW-ASSY,
open the
PAPER-GUIDE-FEEDING64-MW-ASSY
toward you, and disconnect the following
connectors.
- One heater cable connector
- One thermistor connector
And then remove the
PAPER-GUIDE-FEEDING64-MW-ASSY.
Notes for installation
 Be careful not to hit the PCB-ASSY-SNS1
(see 6.5.4).
 Check that the
PAPER-GUIDE-FEEDING64-MW-ASSYext
remity is correctly installed to the
HOLDER(PGF-SIDE)-MW.
Heater connector
Thermistor connector
PAPER-GUIDE-FEEDIN64-MW-ASSY
Wiring can be done easily after
placing the paper feed unit.