Oki IP-6620 - 2.2 Maintenance when the Printer is Turned Off for more than One Month; 2.3 Replacement of Parts; 2.4 Cleaning

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 2 Inspection and Maintenance
2-4
2.2 Maintenance when the Printer is Turned Off for more than
One Month
See 5.5.24 System Error 2010: Long-term Storage Error.
2.3 Replacement of Parts
Refer to the User’s Guide to replace the following parts.
- Wiper blades (rubber and sponge)
- Wiper sponge
- Wiper cleaning liquid
2.4 Cleaning
If the printer exterior is dirty, clean it with a soft cloth moistened with water or a solution neutral
detergent diluted in water.
Notes
 Always turn the printer off before cleaning.
 Never use volatile solvents such as thinner and benzene, as they may degrade the printer
surfaces or cause the painting to peel off.