Oki IP-6620 - Chapter 2 Inspection and Maintenance; 2.1 Periodic Inspection and Maintenance Guideline; 2.1.1 How to check the daily maintenance execution rate

OKI Data Infotech Corporation CONFIDENTIAL
2-1
Chapter 2 Inspection and Maintenance
This chapter describes periodic inspection and periodic maintenance operations.
2.1 Periodic Inspection and Maintenance Guideline
The printer requires periodic inspection and maintenance. Confirming the maintenance execution
rate and perform the operations listed below. If the execution rate is low, advise the user to
perform the maintenance operations.
2.1.1 How to check the daily maintenance execution rate
Daily maintenance execution rate can be checked on the printer operation panel and CP_Manager.
<Procedure to check the daily maintenance execution rate on the operation panel>
1
Confirm that the printer is not currently printing and press the MENU button.
2
Press the OK button.
3
Press the Down button.
4
Press the OK button.
5
Press the OK button.
6
The maintenance execution rate is displayed.
>>>MAINT EXECUT RATE
 XXX% ◎
>>MAINTENANCE INFO
 MAINT EXECUT RATE ◎
>INFORMATION
 MAINTENANCE INFO ◎
>INFORMATION
 WARNING INFO ◎
MENU
 INFORMATION ◎